2D Height Gauge. SPECIFICATIONS Measuring Range :625 mm Expandable Range :825 mm Resolution :0.0005 mm (Numeric Jena Scale, Germany) Repeatability : On planes : 0.002 mm On bores : 0.003 mm Accuracy : 2.5+(L/275), L in mm Squareness : 0.006 mm (compensated frontal) Weight : 27 Kg approximately Memory : 1000 steps Probing Force : 0.9 + 0.2 Newton’s Functions * Automatic contacting of plane from above. * Automatic contacting of plane from below. * Automatic contacting of bore in up and down direction. * Automatic contacting of shaft in down and up condition. * Direct measurement of bore diameter and bore centre. * Direct measurement of bore centre using conical stylus. * Computing distance between 2 measured values. * Computing symmetry between 2 measured values. * Repeating a particular sequence. * Automatic calculation between last two measured data. * Measurement of run-out. * Measurement of groove, width and centre. * Measurement with two references * Measurement of minimum and maximum value relative to a surface * Measurement of depths. 2D MEASUREMENT FUNCTION * Distance and angle between two bores. * Angle between 3 bores. * Centre point and diameter of PCD circle. * Skew function to arithmetically align the test piece. * Squareness measurement with perpendicularity error < 8 microns * Switch to measurement in the second axis. * To assess co-ordinate in X and Y axis simultaneously. * Measurement in Cartesian and polar coordinates * Aligning a component using translation and rotation of XY Co-ordinate System Automatically.